1.27 mm pitch connector for cable idc (1.27 mm) scsi-ii, scsi-iii configuration of product part no. mating connectors: pcs-xe series straight or right-angle through hole type female connector for pcb. pcs-xe series smt type female connector. for use with housings: scsi-ii: pcs-e( )l( ). scsi-iii: pcs-xem( )dl( )( )n required tools: discrete wire tool: pcs-k1 or fhat-918b and fhpt-918a. flat cable tool: pcs-k4 idc type male connector for cable pcs-xe( )m( )( )+ ??? ?? pcs-xe ( ) m ( ) ( )+ components ? ? ? ? ? contacts shell insulator spacer cable cover dimensions part no. ab cd 25.46 40.7 52.13 72.45 15.24 30.48 41.91 62.23 19.61 34.85 46.28 66.6 25.46 40.7 52.1 72.4 pcs-xe26m( )( )+ pcs-xe50m( )( )+ pcs-xe68m( )( )+ pcs-xe100m( )( )+ ? series name ? no. of contacts: 26, 50, 68 or 100 ? type of contact: male ? cable sizes for reference purposes (in case the cable insulation is made of pvc resin) blank : awg#28(7 / 0.127) or awg#30(1 / 0.254). outside diameter of insulation is 0.8-1.0 mm. for discrete wire. (see note #1) a : awg#28(7 / 0.127) or awg#30(1 / 0.254). outside diameter of insulation is 0.5-0.65 mm. for discrete wire. b : awg#30(7 / 0.1). outside diameter of insulation is 0.5-0.65 mm. for discrete wire. c : awg#28(7 / 0.127) or awg#30(1 / 0.254). for flat cable, t = 1.0 mm max. (see note #2) e : awg#30(7 / 0.1). for flat cable, t = 1.0 mm max. (see note #2) j : awg#28(7 / 0.127) or awg#30(1 / 0.254). outside diameter of insulation is 0.65-0.8 mm. for discrete wire. k : awg#30(7 / 0.1). outside diameter of insulation is 0.65-0.8 mm. for discrete wire. q : awg#30(7 / 0.1). outside diameter of insulation is 0.8-1.0 mm. for discrete wire. ? contact plating blank : min. 0.2 m gold plating g1 : min. 0.76 m gold plating d 4-r1.04 1.27 b a last pos. 7.3 5.7 2.54 pos.#1 last pos. c 13.2 5 1.27 b pos.#1 pos.#2 pos.#2 15? ? ? ? ? ? cable cover for discrete wire cable cover for flat cable for 68 or 100-contact connector note 1: p/n pcs-xe100m+ is not available. note 2: this 100-contact connector is not available for flat cable. (c, e) because some combinations of configurations of product part no., are under consideration for development, please contact us for availability details. others wire wrapping crimping soldering idc press-in smt through hole
|
